1、接到加工單后,必須理解加工圖圖意,復查其圖所指的各數據與單內數據是 否相吻合,在吻合的條件下,再進行材料領料手續，有疑惑的情況及時的反饋給 上級主管。
1, received a single processing, must understand the meaning of the data processing Tutu, review the figure referred to in the data is consistent with the single, in consistent conditions, then the material warehouse, confused situation timely feedback to supervisor.
2、按單內所指領用材料型號、規格、顏色由倉管員認可簽字后，按單內數量查實后領料，領料前先檢查鋁型材規格、外觀質量：外表面不得有腐蝕、氧化缺陷及劃傷，彎弧型材需要檢驗員檢驗合格后方可領出加工。
2, according to the single within the meaning of material used for models, specifications, color tube signed by the warehouse after the material according to the single quantity check, first check the aluminum material specifications, appearance quality: outer surface without oxidation corrosion, and scratch defects, curved sections need inspector inspection qualified rear can out of processing.

3、鋸切常規度角鋁型材：用雙頭鋁切機按鋸床的操作規程要求調試鋸床，根據型材套料表試鋸1支做到自檢所做的長度、角度、表面等各方面的檢查后才能批量鋸切。 鋸切小余45度或大余135度角鋁型材：先用雙頭鋸斷材料再用單頭角度鋁型材切割機根據圖紙內所標的角度，調試鋸床試鋸1支做到自檢所做的長度、角度、表面等各方面的檢查。

3, sawing the regular angle aluminum profile: double head aluminum cutting machine debug the sawing machine according to the operation rules of the sawing machine. According to the section saw, 1 saws, do the inspection of length, angle, surface and other aspects after self inspection, and then batch sawing. Sawing 45 or 135 degree angle aluminum profile: first use double head sawing material, then use single angle aluminum profile cutting machine, according to the angle of the drawings, debug sawing machine 1 saws, do self inspection of length, angle, surface and other aspects of inspection.
4、根據圖紙要求需要鉆銑槽口的加工件鋸切后，用產品轉運車將產品轉運到數控加工的加工區內，再進行鉆孔或銑槽。對于槽口少或相對簡單的加工件，可以在普通鉆銑床上進行鉆銑槽口時需要按鋸鉆銑床的操作規程要求調試鉆銑床再進行加工操作。 在加工鉆銑槽口前要做到互檢程序要求，檢查前道工序的加工件是否存在錯誤，杜絕不合格產品出現，同時也做好自檢要求不讓不合格產品進入下道工序。
4, according to the requirements of the drawings, we need to drill and milling the slot parts after sawing, then transfer products to the numerical control processing area with the product transfer car, then drill or groove. For machining parts with few or relatively simple notches, drilling and milling grooves on common drilling and milling machines need to debug drilling and milling machines and do processing operations according to the operation rules of saws and milling machines. Before processing drilling and milling notch, we must do mutual inspection procedure requirements, check whether there are errors in the processing parts of the preceding process, eliminate the unqualified products, and do well in the self inspection requirements, so that the substandard products will not enter the next process.
5、加工完成后的產品，用產品轉運車將產品轉運到產品待檢區進行產品檢查，質檢員按圖紙根據產品檢測規范要求檢查產品，確保出廠產品的合格率為。
5, after the completion of processing products, products for transport vehicles to transport the products products quarantine product inspection, inspectors according to the drawings according to the specification for the testing of product requirements to check the products, to ensure the qualified rate of products is .
6、檢查合格產品，用產品轉運車將產品轉運到產品包裝區進行產品包裝，要根據產品表面的處理方式選用保護膜，包裝時要將保護膜平整的粘貼在產品上，不能有太多的氣泡否則保護膜容易掉落。包裝時對產品要輕拿輕放避免在包裝時對產品劃碰。
6, inspection of qualified products, products for transport vehicles to transport the products in product packaging product packaging, to choose the way of dealing with protective film on the surface of the product, to protect the smooth film packaging of paste in the product, not too many bubbles or protective film is easy to drop. When packing, the product should be light and light to avoid touching the product in the packing.
7、產品檢查保護后，貼上產品合格證按入庫單的數量入庫。再由倉庫管理員按計劃發送到客戶指定的地方。
7. After the inspection and protection of the product, the product qualification certificate is put into the warehouse according to the quantity of the entry form. It is then sent by the warehouse administrator to the designated place of the customer.
本文由鋁切割設備進行編寫，想要了解更多的產品及更詳細的精彩內容，請關注我們的官方網站：http://www.hnyfqpj.cn/
This paper is written by the aluminum cutting equipment. If you want to know more products and more detailed highlights, please pay attention to our official website: http://www.hnyfqpj.cn/.